Rule clarifications

The following rules have been clarified

1/32 Production & Super Production (classes 4 and 4A)

The revised wording is now

E2.2.3      The body may be secured to the chassis in up to four positions.  For this purpose only, up to four pin tube pieces may be added by gluing or soldering to the chassis, in or vertically above the positions intended by the chassis design. 

E2.3.5     Nothing is allowed to be added to the chassis in front of the forward most part of the motor unless otherwise stated in section E.2.2. 

1/32 Saloon (Class 3) , 1/32 National Club Team Championship Sports/GT cars (Class 5), 1/24 Open Group 12 (Class 6), 1/24 Production Saloon (Class 8)

Koford Group 12s - both  part number  M408 and M408J are eligible.

December 2004